image

Pc Based Hitech Home Implementation

image

Hardware Requirements

  • Micro Controller : AT89S52
  • Crystal : 11.0592 MHz
  • Lcd : HD44780
  • Relays
  • Max232
  • Pc
  • Software Requirements

  • Keil
  • Proteus
  • Uc Flash
  • Embedded C
  • Prog Isp
  • Project ID:109
  • Price: 4000
  • Quantity

    Block Diagram

    image

    PROJECT HIGHLIGHTS

    image

    Easy to use, Self-explanatory kit.

    IMAGE

    All-inclusive solution kit.

    IMAGE

    Extensive audio-visuals available.

    image

    Branding-free material.

    IMAGE

    Call/mail for Tech Support from 10 am - 7 pm. col,best career options, Team building

    IMAGE

    Can be Customized for Arduino, Raspberry Pi, PIC quicker jobs, bpo jobs, seo jobs

    PROJECT DESCRIPTION

    The aim of the project “PC BASED HITECH HOME IMPLEMENTATION” is to design a system using which the AC loads in a home can be controlled through a PC using the microcontroller 8051. The project is designed in such a way that the controller is interfaced to PC using serial communication technique. Serial communication is often used either to control or to receive data from an embedded microprocessor. In serial communication the data is sent as one bit at a time. Serial communication is a form of I/O in which the bits of a byte being transferred appear one after the other in a timed sequence on a single wire. Serial communication is commonly used in applications such as industrial automation systems, scientific analysis and certain consumer products. Here the serial communication is established between the PC and the controller by a line driver IC max232 which acts as a voltage converter. And the loads will also be interfaced to the controller through relays. Depending on the input received from the PC, the controller will perform the predefined task of turning ON/OFF the loads. Here the front end application will also be developed on C# .NET platform for the visual effects so that the application can be easily accessed. And an LCD will also be interfaced to the controller to display the status of loads. This project uses regulated 5V, 500mA power supply. Unregulated 12V DC is used for relay.7805 three terminal voltage regulator is used for voltage regulation. Bridge type full wave rectifier is used to rectify the ac output of secondary of 230/12V step down transformer.